how to attach a dildo to a jig saw

It wasn’t too long ago when I was trying to attach a dildo to my jig saw. I had heard of others doing it, but wasn’t sure how to do it myself. I had a plan, but I tell ya, at first I was completely stumped.

Well, after much contemplation, trial and error, I finally figured it out. I was ecstatic, to say the least! I had crafted a decent looking dildo on the jig saw, and I couldn’t hide my smile while attaching it.

So, if you’re looking to take on this challenge, vibrators here’s the breakdown. Firstly, it’s important you have the right tools. You need a reliable jig saw and an appropriate dildo – if you choose the wrong kind, you may end up frustrated.

After you’ve got the right parts, clamp them in securely in your jig saw and slot in the blade. It’s wise to choose a higher-purchase blade, as this will make the job easier with fewer problems.

Next comes the fun part. You want to create a fracture to allow your dildo to attach to the jig saw, so mark out the line of the fracture. Once drawn, you can begin sawing along the fracture line.

Once the line is cut, you should now have a rough edge where the dildo can grasp the jig saw surface. Apply some finishing touches, such as dampening the jigsaw-mounted surface with water, before finally inserting the dildo in the gap. Give it a good press and make sure it’s firmly in place.

Now to the nitty-gritty bit: attaching the dildo to the blade. This is a tricky one and needs to be done with caution as you don’t want your hand to get injured. Heat the blade for a few minutes then use pliers to attach the dildo, pressing firmly until it’s secure. Ensure that the blade is cool before handling the dildo.

When finished, attach the jig saw blade to your jigsaw, making sure it’s securely fitted. Finally, check the dildo attachment with a few test cuts if required.

So there you have it – attaching a dildo to a jig saw may seem daunting, but as long as you follow the steps closely it’s an easy do-it-yourself task. As mentioned, if you make sure to have the right equipment and take your time, you’ll end up with a secure and successful attachment.

Another important thing to consider is the material with which you build the dildo. Wood is the most popular choice, but you have options such as plastic, metal and glass to fit the jig saw. Obviously, make sure to exercise caution when using the jig saw.

If you find yourself uncertain of the structure you’re attaching the dildo to, vibrators think about getting someone else to put it together. That will guarantee a secure attachment. I know a few people who have done this and were not disappointed!

Once you get a safe and secure attachment, it’s important to mind the gap between the dildo and the jigsaw. You don’t want the dildo to get hit with a jarring force as the motor runs, as this could damage the construction. To avoid this happening, use a buffer material to fill up the space.

Finally, make sure that the dildo is secure before using the jig saw. Check the blade to make sure it has enough tension and is spinning smoothly. If all is well, you’re good to go!

I’ve found that if you’re careful when attaching the dildo to the jig saw it works out just fine. To be safe, though, have someone on hand to monitor the process and adjust the tension if needed. This can be a fun project – just make sure to be careful and only use the jig saw on a flat, stable surface.