how to build a sawsaw dildo

Hey there pal, I’m here today to talk to you about my latest project: building a sawsaw dildo. Now, this may sound like a strange concept, but it is actually a great way to make a dildo with some elbow grease, a few tools and some good ‘ol fashioned DIY craftsmanship.

First of all, I needed to gather the supplies needed for my sawsaw dildo. I went to my local hardware store and picked up some hardwood, a few screws, a hacksaw and a handful of dowel rods. Once I had everything I needed, I was ready to begin.

The first step in this process was to cut the hardwood into four thin strips, each angled to form a sawtooth pattern. This took some time because I had to make sure the teeth were just right and that the angles were correct. Once I was satisfied, I used some wood screws to secure the pieces in place.

Next, I drilled a hole through the center of the wood strips. This was the spot where the dowel rod would be inserted and act as the handle for sex dolls the sawsaw dildo. I sanded down the wood to make sure there were no sharp edges and then I used some wood glue to hold everything together.

The third step was to create an insert for the dowel rod. This was done by cutting a square piece of wood that fit snugly into the hole. I had to be careful here because it was important for the insert to be smooth and not interfere with the dowel rod itself.

Once the insert was in place, the dowel rod was carefully placed into the hole and secured with wood screws. Again, I had to be careful to make sure the screws were tight but not too tight since this would form the handle of the sawsaw dildo.

Last, I sanded the entire surface of the sawsaw dildo to make sure it was as smooth as possible. Once the sanding was finished, all I had to do was apply some wood stain and protective varnish. This gave the finished product a beautiful sheen and vibrators the sawsaw dildo was completed!

I was extremely pleased with the result and it really does look like a professional-made dildo. There was a real sense of satisfaction when I held it in my hands and I was proud at how I had transformed something as simple as wood into a fully-functional sawsaw dildo.

Now that the dildo was ready, it was time to put it to the test. After some careful experimentation, I was pleased to find that it worked perfectly and felt great when used! My unique sawsaw dildo now serves as the perfect tool for solo pleasure and I can definitely recommend it to anyone considering making their own.

So, if you’re looking for an easy and fun way to make your own sawsaw dildo, I would highly recommend it. With a little patience and the right supplies, you can create something that is truly special and will provide many years of pleasure.